In this short FAQ you’ll learn a step-by-step incoming inspection for a silver flat-back crystal set. We cover what to look for in the mirror-like backs, how to check mixed sizes and shapes, and what to do when pieces don’t meet your salon standard.

1. What’s the first quick look when you open a silver mixed-shape set?
Start with a visual sweep on a neutral surface. You’re checking overall shine and the set’s identity: this is a silver design with mirror-like metallic backs and clear faceted tops. Note any obvious clouding, scratches, or a dull finish right away.
2. How do you check the mirror-like silver backs for defects?
Hold the gems at an angle under bright light. Look for peeling, flaking, or missing silver on the backs and any discoloration like pale gold or brass where silver should be consistent. Record any chips or oxidized spots; those affect glue contact and longevity.
3. How to confirm sizes and counts for mixed round pieces?
Use a small ruler or calipers to sample each of the six round sizes. Count a few from each compartment to confirm approximate quantity. Slight variations can happen during packing, but large gaps in a size or missing rounds should be flagged.
4. What about mixed shapes—how do you inspect those?
Spread the dozen assorted shapes (pear, marquise, angular cuts, etc.) and compare them visually for consistent cut style and edge quality. Check for flat backs that sit evenly; any warped or uneven-butted pieces can lift after application.
5. How do tools and storage boxes factor into the check?
Verify the kit includes the black tweezers, the decorative picker pen with printed gems, and two clear compartmented storage boxes. Test the tweezer tip for alignment and the pen tip for picking small pieces. Boxes should close securely and keep shapes separated.
If you need a consistent sample for training or comparison, try https://dynamicnailsupply.com/products/silver-multi-shape-size-nail-crystal-gem-rhinestone-set-flat-back-with-kit-mixed-round-and-different-shapes as your incoming lot.
6. When should you reject a batch or return a box?

Reject if more than a few percent have flaked silver backs, visible cloudiness on facets, bent flat-backs, or missing core tools. Also act if the storage compartments are cracked or the included tweezers are misaligned. Note any extreme size inconsistency across the rounds.
7. How to check adhesion readiness before stocking?
Confirm flat-back surfaces are smooth and free of residue. Test one piece on a sample nail with the glue you use (do not use the kit tools to contaminate). Rhinestones are not self-adhesive; make sure the backs accept glue or builder gel without visible gaps.
8. Are there safety or handling notes to record?
Yes. These are small parts; store boxes closed and keep out of reach of children under 3. Avoid inhaling dust while handling and never use damaged stones on clients. Label storage with contents and inspection date.
9. Where does fit in your checklist?
Use the product as your sample lot when training staff on inspection steps and tool checks, then log results and put accepted boxes into active inventory. A low-cost starter sample like this one (priced around $9.99, price may change) helps set standards without wasting premium stock.

10. What action steps finish this incoming check?
- Log the batch and inspection date.
- Quarantine pieces with minor finish flaws for craft use only.
- Return or report severely defective boxes to the vendor.
- Train at least two team members on this quick routine.
Mini Glossary
- Flat-back: rhinestones with a smooth underside for gluing.
- Mirror back: metallic coating on the underside that increases reflectivity.
- Marquise/pear: common specialty shapes in mixed kits.
Final pro tip: keep one inspected sample box open at the station for client-matching and use sealed spares for service; that way you catch any surprises early and keep the sparkle consistent.